Skip to content Skip to footer

YE European Yurts

European Yurts

Yurts Materials And Specifications

Lattice wall: steamed and curved ash wood 1,5*3cm, fastened with metal furniture connecting screws. Finshed with oil

Strap: the lattice wall is held together by a strap (from 4 to 8 diameters)

Doors: dried soild pine finished with Milesi wood protector

Rafters: dried soild pine finished with oil

Ring and dome: The ring is glued and screwed dried soild pine, finished with Milesi wood protector.
Plexi dome is made by curved polycarbonate or acrylic. Material warranty for dome is 10 years. Does not apply to usage damage.

Steel cable is used for 33 foot yurts. Steel “L” plate, 40 x 40 x 40 mm, attached to deck with four screws, and the ring to rafters.

Rafters are attached to poles with 40*160mm perforated corner plates

Cover: 200 g/m² light fabric is a 100% polyester fabric, which is coated with acrylate on one side. The coating has outstanding properties in comparison with piece dyed polyester or cotton. Weather resistant to -40degrees .Cover is resistant against water pressure, Weatherproof, UV- resistant, anti-microbal, stain resistant and water repellent.
Cover has 8 inch PVC mudguard.
Extra wind protector: Plastic based, UV resistant ropes. Maximum wind 75 mph.
Extra snow kit is available.

Insulation: 5 layers of isulation, including 4 layers of antimicrobal and breathable 400g/m2 geo-felt and 1 layer of SolFlex breathable vapor permeable foil.

Fire rate: Choose fire proof cover, and flame retardant finishing for the wood structure.

We ship our yurts anywhere in the world.
Contact us at info@yurtspaces.com
or call +15618071969 (Americas) or +443300272104 (Europe/Middle East)
Go to Top